US Navy WWII Fighter F-4F Wildcat
Capital Airshow 2025
CapAS202560March 22, 2025 by kopperlben
© kopperlben, all rights reserved.
This page simply reformats the Flickr public Atom feed for purposes of finding inspiration through random exploration. These images are not being copied or stored in any way by this website, nor are any links to them or any metadata about them. All images are © their owners unless otherwise specified.
This site is a busybee project and is supported by the generosity of viewers like you.
US Navy WWII Fighter F-4F Wildcat
Capital Airshow 2025
Joseph Guarino @joegurino
A 1938 Grumman F3F-2 "Flying Barrel". Predecessor of the Grumman F4F Wildcat.
The Grumman F3F is a biplane fighter aircraft produced by the Grumman aircraft for the United States Navy during the mid-1930s. Designed as an improvement on the F2F, it entered service in 1936 as the last biplane to be delivered to any American military air arm. It was retired from front line squadrons at the end of 1941 before it could serve in World War II, and replaced by the Brewster F2A Buffalo. The F3F, which inherited the Leroy Grumman-designed retractable main landing gear configuration first used on the Grumman FF, served as the basis for a biplane design ultimately developed into the much more successful F4F Wildcat that succeeded the subpar Buffalo.
Grumman, wanting to take advantage of the powerful new 950 hp (708 kW) Wright R-1820 supercharged radial engine, began work on the F3F-2 without a contract; the order for 81 aircraft was not placed until 25 July 1936, two days before the type's first flight.The engine's larger diameter changed the cowling's appearance, making the aircraft look even more like a barrel, though top speed increased to 255 mph (410 km/h) at 12,000 ft (3,700 m).
The entire F3F-2 production series was delivered in between 1937 and 1938; when deliveries ended, all seven Navy and Marine Corps pursuit squadrons were equipped with Grumman single-seat fighters. Further aerodynamic improvements were made to an F3F-2 (BuNo 1031) based on wind tunnel studies in the NACA Langley 30' x 60' full-scale wind tunnel and became the XF3F-3. It featured a larger-diameter propeller, and a complete revision of the fuselage skinning forward of the aft cabane strut in order to improve aerodynamics and reduce carbon monoxide intrusion. On 21 June 1938, the Navy ordered 27 F3F-3s, as new monoplane fighters like the Brewster F2A and Grumman's own F4F Wildcat were taking longer to develop than had been planned.
A 1938 Grumman F3F-2 "Flying Barrel". Predecessor of the Grumman F4F Wildcat.
The Grumman F3F is a biplane fighter aircraft produced by the Grumman aircraft for the United States Navy during the mid-1930s. Designed as an improvement on the F2F, it entered service in 1936 as the last biplane to be delivered to any American military air arm. It was retired from front line squadrons at the end of 1941 before it could serve in World War II, and replaced by the Brewster F2A Buffalo. The F3F, which inherited the Leroy Grumman-designed retractable main landing gear configuration first used on the Grumman FF, served as the basis for a biplane design ultimately developed into the much more successful F4F Wildcat that succeeded the subpar Buffalo.
Grumman, wanting to take advantage of the powerful new 950 hp (708 kW) Wright R-1820 supercharged radial engine, began work on the F3F-2 without a contract; the order for 81 aircraft was not placed until 25 July 1936, two days before the type's first flight.The engine's larger diameter changed the cowling's appearance, making the aircraft look even more like a barrel, though top speed increased to 255 mph (410 km/h) at 12,000 ft (3,700 m).
The entire F3F-2 production series was delivered in between 1937 and 1938; when deliveries ended, all seven Navy and Marine Corps pursuit squadrons were equipped with Grumman single-seat fighters. Further aerodynamic improvements were made to an F3F-2 (BuNo 1031) based on wind tunnel studies in the NACA Langley 30' x 60' full-scale wind tunnel and became the XF3F-3. It featured a larger-diameter propeller, and a complete revision of the fuselage skinning forward of the aft cabane strut in order to improve aerodynamics and reduce carbon monoxide intrusion. On 21 June 1938, the Navy ordered 27 F3F-3s, as new monoplane fighters like the Brewster F2A and Grumman's own F4F Wildcat were taking longer to develop than had been planned.
Source: tipolog.livejournal.com
Published at: digitalposterarchive.com/soft-drinks/coca-cola-ad-and-pos...
Published at: digitalposterarchive.com/1939-1945-world-war-ii/world-war...
National Museum of the Marine Corps, Quantico Virginia
F4F Wildcat Fighter, WWII
National Naval Aviation Museum
In 1942, Commander Richard F. Whitehead proposed an idea for the carrier qualification of the thousands of Naval Aviators expected to fill the ranks of the Navy and Marine Corps with the entry of the United States into World War II. Whitehead proposed operating training aircraft carriers on Lake Michigan. Two training carriers, Wolverine (IX-64) and Sable (IX-81), were developed and maintained a brisk operating schedule.
As could be expected, a number of aircraft were lost in training; decades later, however, several of those aircraft, some one-of-a-kind examples or actual combat veterans, have been recovered from the bottom of the lake and restored by this Museum. An F4F Wildcat and SBD Dauntless are displayed as they were recovered from Lake Michigan.
